Event_Register_Interface - Cisco Catalyst 2960 series Configuration Manual

Event_reqinfo For EEM_EVENT_IDENTITY
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u
event_severity %u identity_stage %u identity_status %u interface %u identity_mac %u
identity_<attribute> {%s}"
Event Type
event_id
event_type
event_type_string
event_pub_sec event_pub_msec
event_severity
identity_stage
identity_status
interface
identity_mac
identity_<attribute>

event_register_interface

Registers for an interface counter event. Use this Tcl command extension to generate an event when specified
interface counters exceed specified thresholds.
Syntax
event_register_interface [tag ?] name ?
parameter ? entry_op gt|ge|eq|ne|lt|le
entry_val ? entry_val_is_increment TRUE|FALSE
entry_type value|increment|rate
[exit_comb or|and]
[exit_op gt|ge|eq|ne|lt|le]
[exit_val ?] [exit_val_is_increment TRUE|FALSE]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
event_register_interface
Description
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
Type of event.
An ASCII string that represents the name of the event
for this event type.
The time, in seconds and milliseconds, at which the
event was published to the EEM.
The severity of the event.
One among authentication, autherization or
autherization-complete stages.
Success or one of these failure types: fail_authc,
fail_aaa_server, fail_no_response, fail_timeout,
fail_authz. For autherization-complete it is always
success.
The interface for the event.
The MAC address of the remote device for the event.
For each AAA attribute, a set a dynamic variable to
the value corresponding to that AAA attribute in the
attribute or value list.
1889