Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Write Embedded Event Manager Policies Using Tcl
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
global auto_index auto_path
puts [array names auto_index]
if { [catch {test1} result]} {
puts "calling test1 failed result = $result $auto_path"
}
if { [catch {test2} result]} {
puts "calling test2 failed result = $result $auto_path"
}
if { [catch {test3} result]} {
puts "calling test3 failed result = $result $auto_path"
}
Step 6
enable
Enables privileged EXEC mode. Enter your password if prompted.
Example:
Device> enable
Step 7 configure terminal
Enables global configuration mode.
Example:
Device# configure terminal
Step 8
event manager directory user library path
Use this command to specify the EEM user library directory; this is the directory to which the files in
User Tcl Library Index
Example:
Device(config)# event manager directory user library disk2:/eem_library
Step 9
event manager directory user policy path
Use this command to specify the EEM user policy directory; this is the directory to which the file in
User Tcl Library Index
Example:
Device(config)# event manager directory user policy disk2:/eem_policies
Step 10
event manager policy policy-name [type {system | user} [trap ]
Use this command to register a user-defined EEM policy. In this example, the policy named libtest.tcl is registered.
Example:
Device(config)# event manager policy libtest.tcl
Step 11 event manager run policy-name

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

1798
were copied.
was copied.
Creating an EEM
Creating an EEM