Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

# This file is generated by the "pkg_mkIndex" command
# and sourced either when an application starts up or
# by a "package unknown" script. It invokes the
# "package ifneeded" command to set up package-related
# information so that packages will be loaded automatically
# in response to "package require" commands. When this
# script is sourced, the variable $dir must contain the
# full path name of this file's directory.
package ifneeded xmlrpc 0.3 [list source [file join $dir xmlrpc.tcl]]
Step 4 Copy the Tcl library files from
User Tcl Package Index
Step 5
Copy a user-defined EEM policy file written in Tcl to the directory used for storing user-defined EEM policies on the
target device. The directory can be the same directory used in
The directory for storing user-defined EEM policies can be the same directory used in
Index. The following example user-defined EEM policy can be used to test the Tcl package support in EEM.
packagetest.tcl
Example:
::cisco::eem::event_register_none maxrun 1000000.000
#
# test if xmlrpc available
#
#
# Namespace imports
#
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
#
package require xmlrpc
puts "Did you get an error?"
Step 6 enable
Enables privileged EXEC mode. Enter your password if prompted.
Example:
Device> enable
Step 7
configure terminal
Enables global configuration mode.
Example:
Device# configure terminal
Step 8 event manager directory user library path
Use this command to specify the EEM user library directory; this is the directory to which the files in
User Tcl Package Index
Example:
Device(config)# event manager directory user library disk2:/eem_library
Step 9 event manager directory user policy path
Creating an EEM User Tcl Package Index
to the directory used for storing user library files on the target device.
were copied.

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

How to Write Embedded Event Manager Policies Using Tcl
and the pkgIndex file from
Creating an EEM User Tcl Package
Creating an EEM User Tcl Package
Creating an EEM
Index.
Creating an EEM
1801