Event_Register_Neighbor_Discovery - Cisco Catalyst 2960 series Configuration Manual

Set _cerrno
No
Event_reqinfo For EEM_EVENT_MAT
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u
event_severity %u notification %u intf_name %u mac_address {%s}"
Event Type
event_id
event_type
event_type_string
event_pub_sec event_pub_msec
event_severity
notification
intf_name
mac_address

event_register_neighbor_discovery

Registers for a neighbor discover event. Use this Tcl command extension to generate an event when a Cisco
Discovery Protocol (CDP) or Link Layer Discovery Protocol (LLDP) cache entry or a interface link status
changes.
Syntax
event_register_neighbor_discovery [tag ?] interface ?
[cdp {add | update | delete | all}]
[lldp {add | update | delete | all}]
[link-event]
[line-event]
[queue_priority {normal | low | high | last}]
[maxrun ?] [nice {0 | 1}]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
event_register_neighbor_discovery
Description
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
Type of event.
An ASCII string that represents the name of the event
for this event type.
The time, in seconds and milliseconds, at which the
event was published to the EEM.
The severity of the event.
Notification type--add or delete.
The interface name for the address table entry.
The mac-address for the address table entry.
1905