Dell S6100 Configuration Manual page 515

Type
127
127
127
Inventory Management TLVs
127
127
127
127
127
127
127
127
LLDP-MED Capabilities TLV
The LLDP-MED capabilities TLV communicates the types of TLVs that the endpoint device and the network connectivity device support.
LLDP-MED network connectivity devices must transmit the Network Policies TLV.
• The value of the LLDP-MED capabilities field in the TLV is a 2–octet bitmap, each bit represents an LLDP-MED capability (as shown in
the following table).
• The possible values of the LLDP-MED device type are shown in the following. The Dell Networking system is a network connectivity
device, which is Type 4.
SubType
2
3
4
Implementation of this set of
TLVs is optional in LLDP-MED
devices. None or all TLVs must
be supported. Dell Networking
OS does not currently support
these TLVs.
5
6
7
8
9
10
11
12–255
TLV
Network Policy
Location Identification
Location Identification
Inventory — Hardware Revision
Inventory — Firmware Revision
Inventory — Software Revision
Inventory — Serial Number
Inventory — Manufacturer
Name
Inventory — Model Name
Inventory — Asset ID
Reserved
Link Layer Discovery Protocol (LLDP)
Description
• LLDP device class
Indicates the application type,
VLAN ID, Layer 2 Priority, and
DSCP value.
Indicates that the physical
location of the device expressed
in one of three possible formats:
• Coordinate Based LCI
• Civic Address LCI
• Emergency Call Services
ELIN
Indicates power requirements,
priority, and power status.
Indicates the hardware revision
of the LLDP-MED device.
Indicates the firmware revision of
the LLDP-MED device.
Indicates the software revision of
the LLDP-MED device.
Indicates the device serial
number of the LLDP-MED
device.
Indicates the manufacturer of
the LLDP-MED device.
Indicates the model of the LLDP-
MED device.
Indicates a user specified device
number to manage inventory.
—
515