Creating Multicast Boundaries And Domains - Dell S6100 Configuration Manual

Hide thumbs Also See for S6100:

Table of Contents

Change the interval at which a router sends hello messages.

INTERFACE mode

ip pim query-interval seconds

Display the current value of these parameter.

EXEC Privilege mode

show ip pim interface

Creating Multicast Boundaries and Domains

A PIM domain is a contiguous set of routers that all implement PIM and are configured to operate within a common boundary defined by

PIM multicast border routers (PMBRs).

PMBRs connect each PIM domain to the rest of the Internet.

Create multicast boundaries and domains by filtering inbound and outbound bootstrap router (BSR) messages per interface. The following

command is applied to the subsequent inbound and outbound updates. Timeout removes existing BSR advertisements.

Create multicast boundaries and domains by filtering inbound and outbound BSR messages per interface.

ip pim bsr-border

Remove candidate RP advertisements.

clear ip pim rp-mapping

PIM Sparse-Mode (PIM-SM)