Dell-1 Switch Configuration - Dell S6100 Configuration Manual

Figure 140. Peer Routing Configuration Example

Dell-1 Switch Configuration

In the following output, RSTP is enabled with a bridge priority of 0. This ensures that Dell-1 becomes the root bridge.
Dell#1#show run | find protocol
protocol spanning-tree pvst
no disable
vlan 1,20,800,900 bridge-priority 0
The following output shows the existing VLANs.
Dell#1#show vlan | find NUM
NUM
* 1
20
800
900
Status
Active
Active
Active
Active
Description
OSPF PEERING VLAN
Client-VLAN
Client-VLAN-2
Q Ports
U Po10 (Te 0/0-1)
U Te 0/4,47
U Po1 (Te 0/6)
V Po10 (Te 0/0-1)
V Po10 (Te 0/0-1)
V Po10 (Te 0/0-1)
Virtual Link Trunking (VLT) 949