Splitting 100G Ports - Dell S6100 Configuration Manual

The physical port is missing from the show inventory media command output:
Dell# show inventory media
Slot Port Type
-----------------------------------------------------------------------------------
1 3/1/1 QSFP
1 3/1/2 QSFP
1 3/1/3 QSFP
1 3/1/4 QSFP
The physical port is missing also from the show ip interface brief command output:
Dell# show ip interface brief
TenGigabitEthernet 1/3/1/1
TenGigabitEthernet 1/3/1/2
TenGigabitEthernet 1/3/1/3
TenGigabitEthernet 1/3/1/4
TenGigabitEthernet 1/3/3/1
TenGigabitEthernet 1/3/3/2
TenGigabitEthernet 1/3/3/3
TenGigabitEthernet 1/3/3/4

Splitting 100G Ports

The platform supports splitting a single 100G QSFP 28 port into any of the following ports:
• Two 50G ports
• Four 25G ports
• One 40G port
• Four 10G ports
NOTE: You can use the supported breakout cables (for a list of supported cables, refer to the Installation Guide or the Release
Notes).
To split a single 100G port into 50G, 25G, 40G, and 10G ports, use the following commands:
• Split a 100G port into two 50G ports.
CONFIGURATION Mode
stack-unit stack-unit-number module module-number port number portmode dual speed 50G
• stack-unit-number: enter the stack member unit identifier of the stack member to reset.
• module module-number: enter the keyword module then the module number to specify the optional module in which the port is
present.
• number: enter the port number of the 100G port to be split. The range is from 1 to 8.
• Split a 100G port into four 25G ports.
CONFIGURATION Mode
stack-unit stack-unit-number module module-number port number portmode quad speed 25G
• stack-unit-number: enter the stack member unit identifier of the stack member to reset.
• module module-number: enter the keyword module then the module number to specify the optional module in which the port is
present.
• number: enter the port number of the 100G port to be split. The range is from 1 to 8.
• Split a 100G port into one 40G ports.
CONFIGURATION Mode
stack-unit stack-unit-number module module-number port number portmode single speed 40G
• stack-unit-number: enter the stack member unit identifier of the stack member to reset.
Media
40GBASE-SR4
40GBASE-SR4
40GBASE-SR4
40GBASE-SR4
unassigned YES Manual up
unassigned NO
unassigned NO
unassigned NO
unassigned NO
unassigned NO
unassigned NO
unassigned NO
Serial Number
4829455N01XP
4829455N01XP
4829455N01XP
4829455N01XP
Manual administratively down down
Manual administratively down down
Manual administratively down down
Manual administratively down down
Manual administratively down down
Manual up
Manual administratively down down
Dell Qualified
Yes
Yes
Yes
Yes
up
down
Interfaces 397