Dell S6100 Configuration Manual page 280

Field
Local Parameters
Operational status (local port)
ETS DCBx Oper status
State Machine Type
Conf TLV Tx Status
ETS TLV Statistic: Input Conf TLV pkts
ETS TLV Statistic: Output Conf TLV pkts
ETS TLV Statistic: Error Conf TLV pkts
The following example shows the show interface DCBx detail command (IEEE).
Dell(conf-if-te-1/1/1/1-lldp)#do sho int te 1/1/1/2 dc d
E-ETS Configuration TLV enabled
R-ETS Recommendation TLV enabled
P-PFC Configuration TLV enabled
F-Application priority for FCOE enabled
I-Application priority for iSCSI enabled
------------------------------------------------------------------------------------------
Interface TenGigabitEthernet 1/1/1/2
Remote Mac Address 00:01:e8:8a:df:a0
Port Role is Manual
DCBx Operational Status is Enabled
Is Configuration Source? FALSE
Local DCBx Compatibility mode is IEEEv2.5
Local DCBx Configured mode is IEEEv2.5
Peer Operating version is IEEEv2.5
Local DCBx TLVs Transmitted: ERPFi
1 Input PFC TLV pkts, 2 Output PFC TLV pkts, 0 Error PFC pkts
0 PFC Pause Tx pkts, 0 Pause Rx pkts
1 Input ETS Conf TLV Pkts, 1 Output ETS Conf TLV Pkts, 0 Error ETS Conf TLV Pkts
1 Input ETS Reco TLV pkts, 1 Output ETS Reco TLV pkts, 0 Error ETS Reco TLV Pkts
The following example shows the show interface DCBx detail command (legacy CEE).
Dell(conf-if-te-1/1/7/1-lldp)#do sho int te 1/1/4/1 dc d
E-ETS Configuration TLV enabled
R-ETS Recommendation TLV enabled
P-PFC Configuration TLV enabled
F-Application priority for FCOE enabled
I-Application priority for iSCSI enabled
280 Data Center Bridging (DCB)
Description
ETS configuration on local port, including Admin mode (enabled
when a valid TLV is received from a peer), priority groups, assigned
dot1p priorities, and bandwidth allocation.
Port state for current operational ETS configuration:
• Init: Local ETS configuration parameters were exchanged with
peer.
• Recommend: Remote ETS configuration parameters were
received from peer.
• Internally propagated: ETS configuration parameters were
received from configuration source.
Operational status of ETS configuration on local port: match or
mismatch.
Type of state machine used for DCBx exchanges of ETS
parameters:
• Feature: for legacy DCBx versions
• Asymmetric: for an IEEE version
Status of ETS Configuration TLV advertisements: enabled or
disabled.
Number of ETS Configuration TLVs received.
Number of ETS Configuration TLVs transmitted.
Number of ETS Error Configuration TLVs received.
e-ETS Configuration TLV disabled
r-ETS Recommendation TLV disabled
p-PFC Configuration TLV disabled
f-Application Priority for FCOE disabled
i-Application Priority for iSCSI disabled
e-ETS Configuration TLV disabled
r-ETS Recommendation TLV disabled
p-PFC Configuration TLV disabled
f-Application Priority for FCOE disabled
i-Application Priority for iSCSI disabled