Verifying The Dcb Configuration - Dell S6100 Configuration Manual

Hide thumbs Also See for S6100:
Table of Contents

Advertisement

Verifying the DCB Configuration

To display DCB configurations, use the following show commands.
Table 20. Displaying DCB Configurations
Command
show qos dot1p-queue mapping
show interface port-type pfc {summary | detail} Displays the PFC configuration applied to ingress traffic on an
show interface port-type pfc statistics
show interface port-type ets {summary | detail} Displays the ETS configuration applied to egress traffic on an
show interface port-type DCBx detail
show
Examples of the show Commands
The following example shows the show dot1p-queue mapping command.
Dell(conf)# show qos dot1p-queue-mapping
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue
: 1 0 2 3 4 5 6 7
The following example shows the output of the show qos dcb-map test command.
Dell#show qos dcb-map test
-----------------------
State
:Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS
BW:50
Priorities:0 1 2 5 6 7
PG:1 TSA:ETS
BW:50
Priorities:3 4
The following example shows the show interfaces pfc summary command.
Dell# show interfaces tengigabitethernet 1/1/1/4 pfc summary
Interface TenGigabitEthernet 1/1/1/4
PFC:OFF
PFC:ON
Output
Displays the current 802.1p priority-queue mapping.
Displays the data center bridging status, number of PFC-enabled
ports, and number of PFC-enabled queues.
interface, including priorities and link delay.
To clear PFC TLV counters, use the clear pfc counters
interface port-type slot/port command.
Displays counters for the PFC frames received and transmitted (by
dot1p priority class) on an interface.
You can use the show interface pfc statistics
command even without enabling DCB on the system.
interface, including priority groups with priorities and bandwidth
allocation.
To clear ETS TLV counters, enter the clear ets counters
interface port-type slot/port command.
Plays the DCBx configuration on an interface.
Displays the PFC configuration applied to ingress traffic, including
priorities and link delay.
Displays the ETS configuration applied to ingress traffic, including
priorities and link delay.
Data Center Bridging (DCB)
275

Advertisement

Table of Contents
loading

Table of Contents