Configure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. Then, GVRP configuration is per interface on a switch-by-switch
basis. Enable GVRP on each port that connects to a switch where you want GVRP information exchanged. In the following example, GVRP
is configured on VLAN trunk ports.
Figure 45. Global GVRP Configuration Example
Basic GVRP configuration is a two-step process:
1
Enabling GVRP Globally
2
Enabling GVRP on a Layer 2 Interface
Related Configuration Tasks
•
Configure GVRP Registration
•
Configure a GARP Timer
350
GARP VLAN Registration Protocol (GVRP)