Getting Started - Dell S6100 Configuration Manual

This chapter describes how you start configuring your system.
When you power up the chassis, the system performs a power-on self test (POST) and system then loads the Dell Networking Operating
System. Boot messages scroll up the terminal window during this process. No user interaction is required if the boot process proceeds
without interruption.
When the boot process completes, the system status LEDs remain online (green) and the console monitor displays the EXEC mode
prompt.
For details about using the command line interface (CLI), refer to the
Fundamentals chapter.
Topics:
• Console Access
• Default Configuration
• Configuring a Host Name
• Accessing the System Remotely
• Configuring the Enable Password
• Configuration File Management
• Managing the File System
• View Command History
• Upgrading Dell Networking OS
• Using HTTP for File Transfers
• Verify Software Images Before Installation

Getting Started

Accessing the Command Line section in the Configuration
Getting Started
3
45