Dell S6100 Configuration Manual page 165

Hide thumbs Also See for S6100:
Table of Contents

Advertisement

Session Discriminator: 10
Neighbor Discriminator: 11
Local Addr: 2.2.2.3
Local MAC Addr: 00:01:e8:66:da:34
Remote Addr: 2.2.2.2
Remote MAC Addr: 00:01:e8:8a:da:7b
Int: TenGigabitEthernet 1/1/2/1
State: Up
Configured parameters:
TX: 100ms, RX: 100ms, Multiplier: 3
Neighbor parameters:
TX: 100ms, RX: 100ms, Multiplier: 3
Actual parameters:
TX: 100ms, RX: 100ms, Multiplier: 3
Role: Active
Delete session on Down: True
Client Registered: BGP
Uptime: 00:02:22
Statistics:
Number of packets received from neighbor: 1428
Number of packets sent to neighbor: 1428
Number of state changes: 1
Number of messages from IFA about port state change: 0
Number of messages communicated b/w Manager and Agent: 4
The following example shows viewing configured BFD counters.
R2# show bfd counters bgp
Interface TenGigabitEthernet 1/1/1/1
Protocol BGP
Messages:
Registration
: 5
De-registration : 4
Init
: 0
Up
: 6
Down
: 0
Admin Down
: 2
Interface TenGigabitEthernet 1/1/2/1
Protocol BGP
Messages:
Registration
: 5
De-registration : 4
Init
: 0
Up
: 6
Down
: 0
Admin Down
: 2
Interface TenGigabitEthernet 1/1/3/1
Protocol BGP
Messages:
Registration
: 1
De-registration : 0
Init
: 0
Up
: 1
Down
: 0
Admin Down
: 2
The following example shows viewing BFD summary information.
The bold line shows the message displayed when you enable BFD for BGP connections.
R2# show ip bgp summary
BGP router identifier 10.0.0.1, local AS number 2
Bidirectional Forwarding Detection (BFD)
165

Advertisement

Table of Contents
loading

Table of Contents