Dell S6100 Configuration Manual page 60

• removes the resequence command from EXEC mode by requiring a minimum of privilege level 4
• allows access to CONFIGURATION mode with the banner command
• allows access to INTERFACE tengigabitethernet and LINE modes are allowed with no commands
• Remove a command from the list of available commands in EXEC mode.
CONFIGURATION mode
privilege exec level level {command ||...|| command}
• Move a command from EXEC Privilege to EXEC mode.
CONFIGURATION mode
privilege exec level level {command ||...|| command}
• Allow access to CONFIGURATION mode.
CONFIGURATION mode
privilege exec level level configure
• Allow access to INTERFACE, LINE, ROUTE-MAP, and/or ROUTER mode. Specify all the keywords in the command.
CONFIGURATION mode
privilege configure level level {interface | line | route-map | router} {command-keyword
||...|| command-keyword}
• Allow access to a CONFIGURATION, INTERFACE, LINE, ROUTE-MAP, and/or ROUTER mode command.
CONFIGURATION mode
privilege {configure |interface | line | route-map | router} level level {command ||...||
command}
Example of EXEC Privilege Commands
Dell#show running-config privilege
!
privilege exec level 3 configure
privilege exec level 4 resequence
privilege configure level 3 line
privilege configure level 3 interface tengigabitethernet
Dell#telnet 10.11.80.201
Dell#?
configure
disable
enable
ethernet
exit
ip
ipv6
monitor
ping
quit
show
Dell#config
Dell(conf)#do show priv
Current privilege level is 3.
Dell(conf)#?
end
exit
interface
line
Dell(conf)#
Dell(conf)#interface ?
tengigabitethernet
Dell(conf)#
Dell(conf)#interface tengigabitethernet 1/1/2/1
Dell(conf-if-te-1/1/2/1)#?
end
60 Management
Configuring from terminal
Turn off privileged commands
Turn on privileged commands
Ethernet commands
Exit from the EXEC
Global IP subcommands
Global IPv6 subcommands
Monitoring feature
Send echo messages
Exit from the EXEC
Show running system information
Exit from configuration mode
Exit from configuration mode
Select an interface to configure
Configure a terminal line
TenGigabit Ethernet interface
Exit from configuration mode