Dell S6100 Configuration Manual page 152

Establishing Sessions with OSPF Neighbors for the Default VRF
BFD sessions can be established with all OSPF neighbors at once or sessions can be established with all neighbors out of a specific
interface. Sessions are only established when the OSPF adjacency is in the Full state.
Figure 16. Establishing Sessions with OSPF Neighbors
To establish BFD with all OSPF neighbors or with OSPF neighbors on a single interface, use the following commands.
• Enable BFD globally.
CONFIGURATION mode
bfd enable
• Establish sessions with all OSPF neighbors.
ROUTER-OSPF mode
bfd all-neighbors
• Establish sessions with OSPF neighbors on a single interface.
152 Bidirectional Forwarding Detection (BFD)