Msdp Sample Configurations - Dell S6100 Configuration Manual

The following example shows an R3 configuration for MSDP with Anycast RP.
ip multicast-routing
!
interface TenGigabitEthernet 1/1/4/1
ip pim sparse-mode
ip address 10.11.0.32/24
no shutdown
interface TenGigabitEthernet 1/1/5/1
ip pim sparse-mode
ip address 10.11.6.34/24
no shutdown
!
interface Loopback 0
ip pim sparse-mode
ip address 192.168.0.3/32
no shutdown
!
router ospf 1
network 10.11.6.0/24 area 0
network 192.168.0.3/32 area 0
redistribute static
redistribute connected
redistribute bgp 200
!
router bgp 200
redistribute ospf 1
neighbor 192.168.0.22 remote-as 100
neighbor 192.168.0.22 ebgp-multihop 255
neighbor 192.168.0.22 update-source Loopback 0
neighbor 192.168.0.22 no shutdown
!
ip multicast-msdp
ip msdp peer 192.168.0.11 connect-source Loopback 0
ip msdp peer 192.168.0.22 connect-source Loopback 0
ip msdp sa-filter out 192.168.0.22
!
ip route 192.168.0.1/32 10.11.0.23
ip route 192.168.0.22/32 10.11.0.23
!
ip pim rp-address 192.168.0.3 group-address 224.0.0.0/4

MSDP Sample Configurations

The following examples show the running-configurations described in this chapter.
For more information, see the illustrations in the
MSDP Sample Configuration: R1 Running-Config
ip multicast-routing
!
interface TenGigabitEthernet 1/1/1/1
ip pim sparse-mode
ip address 10.11.3.1/24
no shutdown
!
interface TenGigabitEthernet 1/1/2/1
ip address 10.11.2.1/24
no shutdown
!
interface TenGigabitEthernet 1/1/3/1
ip pim sparse-mode
ip address 10.11.1.12/24
no shutdown
!
554 Multicast Source Discovery Protocol (MSDP)
Related Configuration Tasks section.