Adjusting The Keepalive Timer; View Advanced Interface Information - Dell S6100 Configuration Manual

Te 1/2/2
Te 1/2/3
Te 1/2/4
Fo 1/3
Fo 1/4
Fo 1/5
[output omitted]
In the previous example, several ports display "Auto" in the Speed field. In the following example, the speed of port 1/1 is set to 100Mb and
then its auto-negotiation is disabled.
Dell#configure
Dell(config)#interface tengig 1/1/1/1
Dell(conf-if-te-1/1/1/1)#speed 100
Dell(conf-if-te-1/1/1/1)#duplex full
Dell(conf-if-te-1/1/1/1)#no negotiation auto
Dell(conf-if-te-1/1/1/1)#show config
!
interface TenGigabitEthernet 1/1/1/1
no ip address
speed 100
duplex full
no shutdown

Adjusting the Keepalive Timer

To change the time interval between keepalive messages on the interfaces, use the keepalive command. The interface sends keepalive
messages to itself to test network connectivity on the interface.
To change the default time interval between keepalive messages, use the following command.
• Change the default interval between keepalive messages.
INTERFACE mode
keepalive [seconds]
• View the new setting.
INTERFACE mode
show config

View Advanced Interface Information

The following options have been implemented for the show [ip | running-config] interfaces commands for (only) stack-unit
interfaces.
When you use the configured keyword, only interfaces that have non-default configurations are displayed. Dummy stack-unit interfaces
(created with the stack-unit command) are treated like any other physical interface.
Examples of the show Commands
The following example lists the possible show commands that have the configured keyword available:
Dell#show interfaces configured
Dell#show interfaces stack-unit 1 configured
Dell#show interfaces tengigabitEthernet 1 configured
Dell#show interfaces fortyGigE 1 configured
Dell#show ip interface configured
Dell#show ip interface stack-unit 1 configured
Dell#show ip interface tengigabitEthernet 1 configured
Dell#show ip interface hundredGigE 1 configured
Dell#show ip interface br configured
Dell#show ip interface br stack-unit 1 configured
Dell#show ip interface br tengigabitEthernet 1 configured
Dell#show running-config interfaces configured
Dell#show running-config interface tengigabitEthernet 1 configured
Dell#show running-config interface twentyfivegigabitethernet 1 configured
406 Interfaces
Up 10000 Mbit Full
Up Auto Mbit Full
Up 10000 Mbit Full
Down 40000 Mbit Auto
Down 40000 Mbit Auto
Down Auto Mbit Auto
2-5
2-5
2-5
--
--
--