Figure 40: Ethernet Type Filter
The following items are displayed on this page:
Disabled — Access point does not filter Ethernet protocol types.
◆
◆
Enabled — Access point filters Ethernet protocol types based on the
configuration of protocol types in the filter table. If the status of a
protocol is set to "ON," the protocol is filtered from the access point.
Local Management — Describes the Ethernet filter type.
◆
ISO Designator — Describes the ISO Designator identifyer.
◆
◆
Filter Status — Turns the filter on or off.
– 81 –
| Advanced Settings
C
7
HAPTER
Access Control Lists