| Initial Configuration
C
4
HAPTER
Main Menu Items
M
M
I
AIN
ENU
TEMS
A
UTHENTICATION
802.1x — Enables 802.1x authentication. (Default: Enabled)
◆
◆
802.1x Reauthentication Refresh Rate — Sets the reauthentication
refresh rate for 802.1x authentication. (Default: 3600 seconds; Range:
1-65535 seconds; 0=disabled)
RADIUS — If configuring a RADIUS server refer to the section
◆
"RADIUS Client Commands" on page
To configure settings, click the relevant Main Menu item. Each Main Menu
item is sumarized below with links to the relevant section in this guide
where configuration parameters are described in detail:
System — Configures Management IP, WAN, LAN and QoS settings.
◆
See
"System Settings" on page
Adminstration — Configures HTTP and Telnet settings. See
◆
"Management Settings" on page 65
Advance — Confiures LLDP and Access Control Lists. See
◆
Settings" on page 76
Wireless Settings — Configures Wi-Fi access point settings. See
◆
"Wireless Settings" on page
SNMP — Configures SNMP settings. See
◆
Mantentance — Congifures firmware upgrades remote and locally. See
◆
"Maintenance Settings" on page 103
Information — Displays current system settings. See
◆
Information" on page
– 50 –
170.
52.
82.
"SNMP Services" on page 92
109.
"Advanced
"Status