Radius-Server Accounting Port - SMC Networks EliteConnect SMCE21011 User Manual

| RADIUS Client Commands
C 19
HAPTER
radius-server
accounting-address
radius-server
accounting port
key_string - Encryption key used to authenticate logon access for
client. Do not use blank spaces in the string. (Maximum length: 20
characters)
D S
EFAULT ETTING
DEFAULT
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)#radius-server primary key green
AP(config)#
This command sets the RADIUS Accounting server network IP address.
S
YNTAX
radius-server accounting-address <address>
address - IP address of the RADIUS Accounting server
D S
EFAULT ETTING
0 (disabled)
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
When the RADIUS Accounting server UDP address is specified, a
◆
RADIUS accounting session is automatically started for each user that
is successfully authenticated to the access point.
E
XAMPLE
AP(config)#radius-server accounting-address 192.168.2.5
AP(config)#
This command sets the RADIUS Accounting port.
S
YNTAX
radius-server accounting port <port>
port - The port used by the RADIUS Accounting server.
(Range: 1024~65535)
– 172 –