Table of Contents
Advertisement
Wi-Fi Phone Cradle
The SMC Cradle Access Point accepts an SMC Wi-Fi Phone in its cradle for
charging the battery. When the device is powered on, just place the phone in the
cradle and charging starts immediately.
LED Indicators
The access point includes three status LED indicators, as described in the following
figure and table.
Power
LED
Status
POWER
On Green
WLAN
On
Off
INTERNET
On/Flashing Green
Off
Ethernet Port
The access point has one 10/100BASE-TX RJ-45 port that can be attached directly
to 10/100BASE-TX LAN segments. Connect this port to the device (cable or ADSL
modem) that provides your Internet access, or to a LAN switch in a network that has
Internet access.
This port supports automatic MDI/MDI-X operation, so you can use straight-through
cables for all network connections to PCs, switches, or hubs.
802.11g
Link/Activity
Wireless
Link/Activity
Description
Indicates that the system is working normally.
Indicates the 802.11g radio is enabled and transmitting or
receiving data through wireless links. The flashing rate is
proportional to network activity.
Indicates the 802.11g radio is disabled.
Indicates a valid link on the Ethernet port and that the access
point is transmitting or receiving data. The flashing rate is
proportional to network activity.
The Ethernet port has no valid link.
Hardware Description
Ethernet
1
1-3
Advertisement
Table of Contents
