| System Logging Commands
C
14
HAPTER
logging clear
show logging
C
U
OMMAND
SAGE
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by
the access point. However, it may be used by the syslog server to sort
messages or to store messages in the corresponding database.
E
XAMPLE
AP(config)#logging facility 19
AP(config)#
This command clears all log messages stored in the access point's memory.
S
YNTAX
logging clear
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
AP(config)#logging clear
AP(config)#
This command displays the logging configuration.
S
YNTAX
show logging
C
M
OMMAND
ODE
Exec
E
XAMPLE
AP#show logging
Logging Information
============================================
Syslog State
Logging Console State
Logging Level
Logging Facility Type
Servers
1: 192.168.1.19, UDP Port: 514, State: Enabled
2: 0.0.0.0, UDP Port: 514, State: Disabled
3: 0.0.0.0, UDP Port: 514, State: Disabled
4: 0.0.0.0, UDP Port: 514, State: Disabled
=============================================
AP#
– 146 –
: Enabled
: Enabled
: Alert
: 16