SMC Networks EliteConnect SMCE21011 User Manual page 48

| Initial Configuration
C 4
HAPTER
Quick Start
The following items are displayed on this page:
DHCP
DHCP Status — Enables/disables DHCP on the access point. (Default:
◆
disabled)
◆ IP Address — Specifies an IP address for management of the access
point. Valid IP addresses consist of four decimal numbers, 0 to 255,
separated by periods. (Default: 192.168.1.1.)
Subnet Mask — Indicates the local subnet mask. Select the desired
◆
mask from the drop down menu. (Default: 255.255.255.0)
Default Gateway — The default gateway is the IP address of the
◆
router for the access point, which is used if the requested destination
address is not on the local subnet. (Default: 192.168.1.254)
If you have management stations, DNS, RADIUS, or other network
servers located on another subnet, type the IP address of the default
gateway router in the text field provided.
Primary and Secondary DNS Address — The IP address of Domain
◆
Name Servers on the network. A DNS maps numerical IP addresses to
domain names and can be used to identify network hosts by familiar
names instead of the IP addresses. (Primary DNS Default Address:
10.10.1.1; Secondary DNS Default Address: 192.168.1.2)
Prev — Returns to the previous screen.
◆
Cancel — Cancels the newly entered settings and restores the orignals.
◆
◆ Next — Proceeds to the final step in the Quick Start wizard.
– 48 –