Table of Contents
Advertisement
| 802.1X Authentication Commands
C
20
HAPTER
802.1x session-
timeout
show authentication
E
XAMPLE
AP(config)#802.1x enable
AP(config)#
This command sets the time period after which a connected client must be
re-authenticated. Use the no form to disable 802.1X re-authentication.
S
YNTAX
802.1x session-timeout <seconds>
seconds - The number of seconds. (Range: 0-65535)
D
EFAULT
0 (Disabled)
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
AP(config)#802.1x session-timeout 300
AP(config)#
This command shows all 802.1X authentication settings, as well as the
address filter table.
C
M
OMMAND
ODE
Exec
E
XAMPLE
AP# show authentication
Authentication Information
===========================================================
MAC Authentication Server : Disable
Session Timeout
Filter Table (Allow List):
-----------------------
-----------------------
Filter Table (Deny List):
-----------------------
-----------------------
===========================================================
AP#
– 176 –
: Disable
Advertisement
Table of Contents
