Make-Rf-Setting-Effective - SMC Networks EliteConnect SMCE21011 User Manual

device ath0 entered promiscuous mode
br0: port 2(ath0) entering learning state
br0: topology change detected, propagating
br0: port 2(ath0) entering forwarding state
Add port ath0 to bridge br0 successfully
ath_vdrv: Version 0.1
All Rights Reserved
AP(if-wireless 0)#
Makes the RF setting effective.
make-rf-setting-
effective
S
YNTAX
C
OMMAND
Interface Configuration (Wireless)
E
XAMPLE
Accton(if-wireless 0)# make-RF-setting-effective
It will take several minutes !
Please wait a while...
device ath0 left promiscuous mode
br0: port 2(ath0) entering disabled state
Delete port ath0 from bridge br0 successfully
ath_netdev_stop: The stopping of the running
ar5416StopDmaReceive: dma failed to stop in 1ms
AR_CR=0x00000024
AR_DIAG_SW=0x40000020
ath_vdrv: driver unloaded
wlan: mac acl policy unregistered
ath_ahb: driver unloaded
ath_dev: driver unloaded
ath_dfs: driver unloaded
ath_rate_atheros: driver unloaded
wlan: driver unloaded
ath_hal: driver unloaded
ath_vdrv: driver unloaded
ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All
s Reserved
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights
d
ath_ahb: 0.9.4.5 (Atheros/multi-bss)(LSDK7.1.3.71_v2)
Howl Revision ID 0xb9
ar5416GetDfsRadars: DFS_FCC_DOMAIN_5416
DFS min filter rssiThresh = 18
DFS max pulse dur = 131 ticks
wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
wlan: mac acl policy registered

make-rf-setting-effective

M
ODE
Right
Reserve
– 207 –
| Wireless Interface Commands
C 26
HAPTER