Table of Contents
Advertisement
U
AP M
U
SING THE
ANAGEMENT
TILITY
Create with Passphrase - The security key for WEP encryption is
generated from your Passphrase string, so it must be the same on all clients
in your network
Manual Entry - Allows manual entry of security keys. (2 Hexadecimal
digits in each block, A~F & 0~9)
Key 1~4 - Each 64-bit Key ID contains 10 HEX digits but 128-Bit
encryption has only 1 Key which contains 26 HEX digits. All wireless
devices must have the same Key ID element values to communicate
Default Key ID - Choose the Key ID that has the encryption string you
prefer. If using a key generated from a Passphrase, you must use the same
Passphrase and key on each station
Set MAC Filter
In the Set MAC Filter screen, you can decide which wireless devices are
allowed to connect to the Access Point by adding the MAC address of
allowed clients. Wireless devices that are not in the table will be denied
access.
Filtering - Choose "Enabled" to enable the MAC Filter (Default:
Disabled)
13
Advertisement
Table of Contents
