General Commands; Cli-Session-Timeout - SMC Networks EliteConnect SMCE21011 User Manual

end
exit

cli-session-timeout

This command returns to the previous configuration mode.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration, Interface Configuration
E
XAMPLE
This example shows how to return to the Configuration mode from the
Interface Configuration mode:
AP(if-ethernet)#end
AP(config)#
This command returns to the Exec mode or exits the configuration
program.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Any
E
XAMPLE
This example shows how to return to the Exec mode from the Interface
Configuration mode, and then quit the CLI session:
AP(if-ethernet)#exit
AP#exit
CLI session with the Access Point is now closed
Username:
This command enables a timeout on the current and subsequent CLI or
Telnet sessions.
S
YNTAX
cli-session-timeout <enable | disable | value>
enable - Enables the default timeout.
disable - Disables the timeout.
value - Sets a value for timeout (Range: 60~3600 seconds)
D S
EFAULT ETTING
120 seconds
– 123 –

| General Commands

C 12
HAPTER