Link Layer Discovery Protocol; Figure 37: Lldp Settings - SMC Networks EliteConnect SMCE21011 User Manual

L L D
INK AYER ISCOVERY
Prevent Intra VAP client communication — When enabled, clients
◆
associated with a specific VAP interface cannot establish wireless
communications with each other. Clients can communicate with clients
associated to other VAP interfaces.
Prevent Inter and Intra VAP client communication — When
◆
enabled, clients cannot establish wireless communications with any
other client, either those associated to the same VAP interface or any
other VAP interface.
P
ROTOCOL
This page allows you to configure the Link Layer Discovery Protocol (LLDP).
LLDP allows devices in the local broadcast domain to share information
about themselves. LLDP-capable devices periodically transmit information
in messages called Type Length Value (TLV) fields to neighbor devices.
Advertised information is represented in Type Length Value (TLV) format
according to the IEEE 802.1ab standard, and can include details such as
device identification, capabilities and configuration settings.
This information can be used by SNMP applications to simplify
troubleshooting, enhance network management, and maintain an accurate
network topology.

Figure 37: LLDP Settings

The following items are displayed on this page:
Disable/Enable — Disables/Enables LLDP on the access point.
◆
– 77 –
| Advanced Settings
C 7
HAPTER

Link Layer Discovery Protocol