| SNMP Commands
C
17
HAPTER
snmp-server enable
server
S
YNTAX
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
AP(config)#snmp-server location WC-19
AP(config)#
R
C
ELATED
OMMANDS
snmp-server contact (155)
This command enables SNMP management access and also enables this
device to send SNMP traps (i.e., notifications). Use the no form to disable
SNMP service and trap messages.
S
YNTAX
snmp-server enable server
no snmp-server enable server
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
This command enables both authentication failure notifications and
◆
link-up-down notifications.
The snmp-server host command specifies the host device that will
◆
receive SNMP notifications.
E
XAMPLE
AP(config)#snmp-server enable server
AP(config)#
– 156 –