Make-Security-Effective - SMC Networks EliteConnect SMCE21011 User Manual

C
OMMAND
◆ WPA2 provides fast roaming for authenticated clients by retaining keys
and other security information in a cache, so that if a client roams away
from an access point and then returns reauthentication is not required.
When a WPA2 client is first authenticated, it receives a Pairwise Master
◆
Key (PMK) that is used to generate other keys for unicast data
encryption. This key and other client information form a Security
Association that the access point names and holds in a cache. The
lifetime of this security association can be configured with this
command. When the lifetime expires, the client security association
and keys are deleted from the cache. If the client returns to the access
point, it requires full reauthentication.
The access point can store up to 256 entries in the PMKSA cache.
◆
E
XAMPLE
AP(if-wireless g: VAP[0])#wpa-pre-shared-key ASCII agoodsecret
AP(if-wireless g: VAP[0])#
This command does something.
make-security-
effective
S
YNTAX

make-security-effective

D
EFAULT
Disabled
C
OMMAND
Interface Configuration (Wireless-VAP)
E
XAMPLE
AP(IF-WIRELESS 0: VAP[0])# MAKE-SECURITY-EFFECTIVE
IT WILL TAKE SEVERAL MINUTES !
PLEASE WAIT A WHILE...
device ath0 left promiscuous mode
br0: port 2(ath0) entering disabled state
Delete port ath0 from bridge br0 successfully
ath_netdev_stop: The stopping of the running
ar5416StopDmaReceive: dma failed to stop in 1ms
AR_CR=0x00000024
AR_DIAG_SW=0x40000020
ath_vdrv: driver unloaded
wlan: mac acl policy unregistered
ath_ahb: driver unloaded
ath_dev: driver unloaded
ath_dfs: driver unloaded
ath_rate_atheros: driver unloaded
wlan: driver unloaded
ath_hal: driver unloaded
U
SAGE
S
ETTING
M
ODE
– 225 –
| Wireless Security Commands
C 27
HAPTER