Table of Contents
Advertisement
Figure 52: QoS
The following items are displayed on this page:
◆
WMM — Sets the WMM operational mode on the access point. When
enabled, the parameters for each AC queue will be employed on the
access point and QoS capabilities are advertised to WMM-enabled
clients. (Default: Support)
Disable: WMM is disabled.
■
Required: WMM must be supported on any device trying to
■
associated with the access point. Devices that do not support this
feature will not be allowed to associate with the access point.
WMM Acknowledge Policy — By default, all wireless data
◆
transmissions require the sender to wait for an acknowledgement from
the receiver. WMM allows the acknowledgement wait time to be turned
off for each Access Category (AC) 0-3. Although this increases data
throughput, it can also result in a high number of errors when traffic
levels are heavy. (Default: Acknowledge)
Aknowledge — Applies the WMM policy.
■
No Aknowledge — Ignores the WMM policy.
■
– 101 –
| Wireless Settings
C
8
HAPTER
QoS
Advertisement
Table of Contents
