Table of Contents
Advertisement
Figure 24: SNTP Settings
The following items are displayed on this page:
Configures the access point to operate as an SNTP client. When enabled, at
SNTP S
ERVER
least one time server IP address must be specified.
S
ETTINGS
◆
◆
◆
SNTP uses Greenwich Mean Time, or GMT (sometimes referred to as
T
Z
S
IME
ONE
ETTING
Coordinated Universal Time, or UTC) based on the time at the Earth's
prime meridian, zero degrees longitude. To display a time corresponding to
your local time, you must indicate the number of hours your time zone is
located before (east) or after (west) GMT.
◆
SNTP Status — Enables/disables SNTP. (Default: enabled)
Primary Server — The IP address of an SNTP or NTP time server that
the access point attempts to poll for a time update.
Secondary Server — The IP address of a secondary SNTP or NTP time
server. The access point first attempts to update the time from the
primary server; if this fails it attempts an update from the secondary
server.
Time Zone — Select from the scroll down list the locale you are
situated most close to, for example for New York, select '(GMT-05)
Eastern Time (US & Canada)'.
– 59 –
| System Settings
C
5
HAPTER
System Time
Advertisement
Table of Contents
