Table of Contents
Advertisement
| Introduction
C
1
HAPTER
Hardware Description
R
B
ESET
UTTON
The access point supports both endspan and midspan PoE.
N
:
OTE
If the access point is connected to a PoE source device and also connected
to a local power source through the AC power adapter, AC power will be
disabled.
This button is used to reset the access point or restore the factory default
configuration. If you hold down the button for less than 5 seconds, the
access point will perform a hardware reset. If you hold down the button for
5 seconds or more, any configuration changes you may have made are
removed, and the factory default configuration is restored to the access
point.
– 34 –
Advertisement
Table of Contents
