| RADIUS Client Commands
C
19
HAPTER
show radius
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
The access point sends periodic accounting updates after every interim
◆
period until the user logs off and a "stop" message is sent.
E
XAMPLE
AP(config)#radius-server timeout-interim 500
AP(config)#
This command displays the current settings for the RADIUS server.
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Exec
E
XAMPLE
AP#show radius
Radius Accounting Information
==============================================
IP
: 10.7.16.96
Key
: *********
Port
: 1813
timeout-interim : 300
==============================================
Radius Primary Server Information
==============================================
Status : ENABLED
IP
: 192.168.1.1
Port
: 1812
Key
: *********
==============================================
Radius Secondary Server Information
==============================================
Status : ENABLED
IP
: 10.7.16.96
Port
: 1812
Key
: ****
==============================================
AP#
– 174 –
Need help?
Do you have a question about the EliteConnect SMCE21011 and is the answer not in the manual?