the maximum length for file names is 32 characters for files on the
access point. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
Remote — Downloads an operation code image file from a specified
◆
remote FTP or TFTP server. After filling in the following fields, click Start
Upgrade to proceed.
New Firmware File: Specifies the name of the code file on the
■
server. The new firmware file name should not contain slashes (\ or
/), the leading letter of the file name should not be a period (.), and
the maximum length for file names on the FTP/TFTP server is 255
characters or 32 characters for files on the access point. (Valid
characters: A-Z, a-z, 0-9, ".", "-", "_")
IP Address: IP address or host name of FTP or TFTP server.
■
Username: The user ID used for login on an FTP server.
■
Password: The password used for login on an FTP server.
■
Start Upgrade — Commences the upgrade process.
◆
– 105 –
| Maintenance Settings
C
9
HAPTER
Upgrading Firmware