Table of Contents
Advertisement
| System Clock Commands
C
15
HAPTER
sntp-server
daylight-saving
sntp-server
timezone
AP#sntp-server date-time
Enter Year<1970-2100>: 2003
Enter Month<1-12>: 6
Enter Day<1-31>: 19
Enter Hour<0-23>: 17
Enter Min<0-59>: 37
AP#
R
C
ELATED
OMMANDS
sntp-server enable (149)
This command sets the start and end dates for daylight savings time. Use
the no form to disable daylight savings time.
S
YNTAX
sntp-server daylight-saving
no sntp-server daylight-saving
D
S
EFAULT
ETTING
Disabled
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
The command sets the system clock back one hour during the specified
period.
E
XAMPLE
This sets daylight savings time to be used from July 1st to September 1st.
AP(config)#sntp-server daylight-saving
Enter Daylight saving from which month<1-12>: 6
and which day<1-31>: 1
Enter Daylight saving end to which month<1-12>: 9
and which day<1-31>: 1
AP(config)#
This command sets the time zone for the access point's internal clock.
S
YNTAX
sntp-server timezone <hours>
hours - Number of hours before/after UTC.
(Range: -12 to +12 hours)
– 150 –
Advertisement
Table of Contents
