Table of Contents
Advertisement
Hardware Description
Ethernet Compatibility
SMC's EZ Connect Wireless Access Point/Bridge attaches directly to
10BASE-T (Twisted Pair) Ethernet LAN segments. These segments must
conform to the IEEE 802.3 specification.
The AP/Bridge appears as an Ethernet node and performs a routing
function by moving packets from the wired LAN to remote workstations
on the wireless infrastructure.
Radio Characteristics
The Wireless AP/Bridge uses a radio modulation technique known as
Direct Sequence Spread Spectrum transmission (DSSS), and a shared
collision domain (CSMA/CA). It operates in the 2.4 GHz license-free
Industrial Scientific and Medical (ISM) band. Data is transmitted over a
half-duplex radio channel operating at up to 11 Mbps per second.
H
D
ARDWARE
ESCRIPTION
3
Advertisement
Table of Contents
