Dns Server - SMC Networks EliteConnect SMCE21011 User Manual

| Ethernet Interface Commands
C 25
HAPTER

dns server

ip address
This command specifies the address for the primary or secondary domain
name server to be used for name-to-address resolution.
S
YNTAX
dns primary-server <server-address>
dns secondary-server <server-address>
primary-server - Primary server used for name resolution.
secondary-server - Secondary server used for name resolution.
server-address - IP address of domain-name server.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
The primary and secondary name servers are queried in sequence.
E
XAMPLE
This example specifies two domain-name servers.
AP(if-ethernet)#dns primary-server 192.168.1.55
AP(if-ethernet)#dns secondary-server 10.1.0.55
AP(if-ethernet)#
R C
ELATED OMMANDS
show interface ethernet (200)
This command sets the IP address for the access point. Use the no form to
restore the default IP address.
S
YNTAX
ip address <ip-address> <netmask> <gateway>
no ip address
ip-address - IP address
netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
gateway - IP address of the default gateway
D S
EFAULT ETTING
IP address: 192.168.2.2
Netmask: 255.255.255.0
– 196 –