DEC XNS, DEC-MOP-Dump-Load, DEC-MOP, DEC-LAT, Ethertalk,
Appletalk-ARP, Novell-IPX(old), Novell-IPX(new), EAPOL, Telxon-
TXP, Aironet-DDP, Enet-Config-Test, IP, IPv6, NetBEUI,
PPPoE_Discovery, PPPoE_PPP_Session)
D
EFAULT
None
C
OMMAND
Global Configuration
C
OMMAND
Use the filter ethernet-type enable command to enable filtering for
Ethernet types specified in the filtering table, or the no filter ethernet-
type enable command to disable all filtering based on the filtering table.
E
XAMPLE
AP(config)#filter ethernet-type protocol ARP
AP(config)#
R
ELATED
filter ethernet-type enabled (184)
This command shows the filter options and protocol entries in the filter
show filters
table.
S
YNTAX
show filters [acl-source-address | acl-destination-address]
C
OMMAND
Exec
E
XAMPLE
AP#show filters
Protocol Filter Information
=======================================================================
Local Bridge
AP Management
EtherType Filter
Enabled EtherType Filters
-----------------------------------------------------------------------
=======================================================================
AP#
M
ODE
U
SAGE
C
OMMANDS
M
ODE
:Traffic among all client STAs blocked
:DISABLED
:DISABLED
– 185 –
| Filtering Commands
C
22
HAPTER