Function Keys; Default Display; A.5.4 Function Keys - Siemens SIPROTEC 7SJ62 Manual

Table A-8
Binary Output
BO3
BO4
BO5
Table A-9
Binary Output
BO1
BO2
BO10
BO11
A.5.4

Function Keys

Table A-10
Function Keys
F1
F2
F3
F4
A.5.5

Default Display

In devices with 4-line displays and depending on the device version, a number of predefined measured value
pages are available. The start page of the default display appearing after startup of the device can be selected
in the device data via parameter 640 Start image DD.
In devices with graphic display, there is a default display indicating the actual operating state and/or selected
measured values. The display size is selected during configuration.
SIPROTEC, 7SJ62/64, Manual
C53000-G1140-C207-2, Release date 01.2008
Further Output Relay Presettings for 7SJ64
Default function Function No.
Relay TRIP 511
52Breaker
52Breaker
79 Close 2851
52Breaker
79 Close 2851
Further Output Relay Presettings for 7SJ641/2/5/7
Default function Function No.
GndSwit.
GndSwit.
Disc.Swit.
Disc.Swit.
Applies to All Devices and Ordered Variants
Display of operational indications
Display of the primary operational measured values
Display of the last fault event recording
Not allocated
Description
Relay GENERAL TRIP command
52 Breaker
52 Breaker
79 - Close command
52 Breaker
79 - Close command
Description
Ground Switch
Ground Switch
Disconnect Switch
Disconnect Switch
Default function
Appendix
A.5 Default Settings
617