Table of Contents
Advertisement
pressed as lines per inch or [pi) when the printer is in
Qume emulation mode.
6
lpi
t
Six lines per inch is standard for most of the fonts in your
printer. Use 8 lines per inch for smaller fonts.
Using the Vertical Motion Index (VMI) command in Qume
emulation mode will allow you to more closely match the
line spacing to the font in use.
1.3
Option 4 - Carriage Return
This Option controls how the printer responds to Carriage
Return «CR» characters it receives while in Qume emu-
lation mode.
<CR>t
<CR><LF>
GROUP
OPTION
TOGGLE
GROUP
OPTION
I
TOGGLE
Q
4
off
Q
4
I
on
If Option 4 is on, the result simulates a "typewriter" car-
riage return.
1.4
Option 5 - Automatic Carriage Re-
turn/Line Feed
This Option controls the action which the printer will take
when it reaches the right margin. Some word processors
insert a carriage return and line feed at the right margin.
When this Option is on, files which already have carriage
returns and line feeds will not print properly because the
Printer Setup
3-31
Advertisement
Table of Contents
