Setting Manual Feed Timeout; Setting The Letterhead Option - QMS 1725E Reference

Choices
Default
Enabling Offset Stacking
Setting this option determines if print jobs are offset in the face-down
output bin.
Menu
Choices
Default

Setting Manual Feed Timeout

This option allows you to set the amount of time the printer waits for
paper to be inserted into the manual feed slot before it cancels the
job.
Menu
Choices
Default
Notes

Setting the Letterhead Option

This option only appears if the duplexing unit is installed on the
printer. The letterhead option allows you to print both simplex and
duplex jobs on letterhead paper from the same input bin (cassette)
without having to sort the pages manually.
Menu
Choices
Default
Notes
4-58
15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours—(Idle time
before activation of low-power state).
Off—Use normal power all of the time.
1 hour
Administration/Engine/Offset Stacking
On, off
On
Administration/Engine/Man. Feed Timeout
000 - 300 seconds
060 seconds
A value of 000 sets the timeout to infinity
Administration/Engine/Letterhead
On, off
Off
Letterhead paper must be loaded face down in the input bin
with the bottom edge inserted first into the printer. You may
notice a decrease in the printing speed depending on the mix
of simplex and duplex pages.
QMS 1725E Print System Reference