Table of Contents
Advertisement
J
Paper Handling
J.l
Paper Handling Commands
I
<ESC>&n1X
I
Select Number of Copies
This command specifies how many copies of each page are
to be printed. Parameter n1defines the number of pages,
with a value between
1
and
99
inclusive. Values greater
than
99
are interpreted as
99,
and a value of zero defaults
to 1.
This command affects the current page and all subsequent
pages. All copies of each page are printed together, before
any copies of the subsequent page.
This command raises the printer throughput on copies after
the first to eight pages/minute, instead of the throughput
achieved when each page has to be individually processed.
This has a major impact on the net throughput of pages
with complex layouts.
I
<ESC>&nlH
I
Paper Source
This command prints the current page (if any) and de-
fines the source of subsequent sheets. Parameter n1has
the effect listed in the table below.
HP Emulation Mode
H-57
Advertisement
Table of Contents
