Table of Contents
Advertisement
I
<ESC>W
I
AUTO CARRIAGE RETURN/LINE
FEED ON
This command causes an automatic carriage return and
line feed whenever printing reaches the right margin. This
movement is ignored when the printer is in Graphics Mode.
The Auto Carriage/Line Feed may also be set by using the
keypad to configure Group Q Option 5.
I
<ESC>Z
I
AUTO CARRIAGE RETURN/LINE
FEED OFF
This command turns off the automatic carriage return and
line feed «ES C> W). The setting of Group
Q
Option 5 will
not be affected by this command.
C.4
Print Quality Commands
The commands explained in this section cause the quality
or characteristics of printing to be altered.
• WPS "ON" implements proportional character spac-
ing.
• WPS "OFF" disables proportional character spacing.
• UNDERSCORE MODE "ON"
• UNDERSCORE MODE "OFF"
• BOLD OVERPRINT "ON"
• BOLD OVERPRINT "OFF"
• SHADOW PRINT "ON"
• SHADOW PRINT "OFF"
G-24
Qume Emulation Mode
I
\
Advertisement
Table of Contents
