Table of Contents
Advertisement
F
Proprinter Emulation Op-
tions (Group
J)
The Group I Options control the printer during Proprinter
Emulation Mode.
NOTE: These Options will apply only if your printer
emulates the IBM Proprinter. If it does not emulate
Proprinter , see the Options listed under Group E -
Epson Emulation Mode.
The printer must be in Proprinter Emulation Mode
before these Options will take effect. See Group lOp-
tions 1 and 2 for instructions for selecting Proprinter
Emulation Mode.
Toggle Option 0 of any Group to save changes to
Printer Setup.
t=
Factory setting
F.1
Option 1 - Printing Zeros
When in Proprinter Emulation Mode, this Option allows
you to specify the printing of zeros with or without slashes.
No Slashest
Slashes
GROUP
OPTION
TOGGLE
GROUP
OPTION
TOGGLE
I
1
off
I
1
on
F.2
Option 2 - Automatic Line Feed
This Option controls the interpretation of the carriage
re-
turn
«CR»
character when in Proprinter Emulation Mode.
<CR>t
<CR><LF>
GROUP
OPTION
TOGGLE
GROUP
OPTION
TOGGLE
I
2
off
I
2
on
Printer Setup
3-27
Advertisement
Table of Contents
