Table of Contents
Advertisement
I
<HT>
I
HORIZONTAL TAB
This command (decimal 9) moves the current print po-
sition to the next horizontal tab. Tabs may be skipped
over by sending the <HT> commands with no text until
the desired tab stop is reached.
I
<ESC>R
I
SET ALL TABS TO POWER ON
.
. DEFAULTS
This command returns all tabs (horizontal and vertical) to
their power up settings.
C.s
Page Format Commands
These commands are used to set form length in lines or
inches .
• SET FORMS LENGTH IN INCHES establishes a
value in inches for the length of the page to be
printed .
• SET FORMS LENGTH IN LINES establishes a value
in lines for the length of the page to be printed.
I
<ESC>CO<m>
I
SET FORMS LENGTH IN INCHES
This command is used to set Forms Length in terms of the
desired number of inches per page. The valid range for
'n' in the command depends on the size of paper being
used. For letter size paper, the range is 1-11. For legal
size paper, the range is 1-14.
If
this command is sent at
the Top Margin, it will establish a Bottom Margin.
Examples:
<ESC>CO<VT>
Set Forms Length to 11"
<ESC>CO<ENQ>
Set Forms Length to 5"
Proprinter Emulation Mode
F-17
Advertisement
Table of Contents
