Table of Contents
Advertisement
1. Calculate the
total count as follows:
Total count
=
(number of characters x
13)
+
2
2. If the total count is less than 256, then
Count 1
=
Total count and Count 2
==
O.
3. If the
Total count is greater than or equal to 256,
then divide the number of bytes by 256.
Count 2
=
the integer part of the result.
Count 1 ::: the remain-
der.
Examples
If the number of characters is 2:
Total count::: (2 x 13)
+
2 :::
28
Count
1
=
28
Count 2
=
0
If the number of characters is 94:
Total count
=
(94 x 13)
+
2
=
1224
Count 1 = 200
Count 2 = 4
Code is the ASCII decimal value for the first downloaded
character. The downloaded characters will replace normal
characters beginning at that point.
Attribute indicates whether the character is ascending or
descending.
Attribute = 0, character is ascending.
Attribute = 1, character is descending.
Column 1 through Column 11 are the values of the ver-
tical columns of dots in each character.
F-28
Proprinter Emulation Mode
Advertisement
Table of Contents
