Table of Contents
Advertisement
I
<ESC>11 SET LINE SPACING TO 7172 INCH
This command will cause the paper to move 7
n2
inch
whenever a <LF> command is received.
I
<ESC>3<n>
I
SET LINE SPACING TO n/216 INCH
This command allows you to establish your own line spac-
ing in 1/216 inch increments. This is a very fine spacing
which closes the dot-gaps in Graphics Mode. The range
of values for 'n' in the command are 1-255. Use exact
multiples of 3 to move exactly n/216 inch.
Spacing
n/216
8 LPI
27/216
6 LPI
36/216
8-DOT
24/216
7-DOT
21/216
Examples:
<ESC>3B
Set line spacing to 66/216"
<ESC>3<CR>
Set line spacing to 13/216"
I
<ESC>A<n>
I
SET LINE SPACING TO n172 INCH
This command stores a line spacing value of n x 0.3528
mm
(nn2
inch). <ESC>2 (Start Text Line Spacing) must
be sent to start the line spacing. This command determines
the amount the print position moves for a line feed.
Proprinter Emulation Mode
F-19
Advertisement
Table of Contents
