Table of Contents
Advertisement
I
<VT>
I
VERTICAL TAB
This command (decimal 11) causes the current print posi-
tion to move down the page to the first set Vertical Tab.
If no tabs are set beyond the current print position, the
current print position will not change.
I
<SI>
I
SHIFT ·IN
The Shift-In control character (decimal 15) accesses the
Primary Character Set in both ECS 7-Bit and ECS 8-Bit
ASCII Modes. The Extended Character Set (ECS) is ex-
plained later in this appendix.
I
<SO>
I
SHIFT·OUT
The Shift-Out control character (decimal 14) accesses the
Secondary Character Set in both ECS 7-Bit and ECS 8-
Bit ASCII Modes. The Extended Character Set (ECS) is
explained later in this appendix.
Diablo Emulation Mode
0-9
Advertisement
Table of Contents
