Table of Contents
Advertisement
scanned by the printer have the character set you spec-
ify through this command.
I
<ESC>nlSn2P
I
Proportional Spacing
This command selects either proportional spacing or fixed
pitch (parameter
n2)
for the primary or secondary font
(n!), according to the table below:
Command for Font:
Spacing
Primary
Secondary
Fixed
<ESC>(sOP
<ESC»sOP
Proportional
<ESC>(slP
<ESC»slP
If
proportional spacing is selected with no such font avail-
able, the printer defaults to the closest fixed pitch font with
the current pitch value.
I
<ESC>nlsn2H
I
Print Pitch (Chars/Inch)
This command defines the print pitch for use with fixed
spacing fonts. Parameter
nl
selects the primary or sec-
ondary font, and
n2
is the desired spacing in characters
per inch, with up to two decimal places of precision. Ex-
amples are provided in the table below:
Print Pitch
lO-pitch
12-pitch
16.66-pitch
Command for Font:
Primary
Secondary
<ESC>(slOH
<ESC»slOH
<ESC>(s12H
<ESC»s12H
<ESC>(s16.66H
<ESC»s16.66H
In order to print in the specified pitch, a font must be
available for that pitch.
If
a non-existent print pitch is
specified, the printer defaults to the next greater pitch, or
if none, the next lower pitch.
The
Set
HMI command can be used to override this com-
mand.
HP Emulation Mode
H-27
Advertisement
Table of Contents
